Sony A6300 with the Meike A6300 battery grip and the ProMediaGear bracket for the Sony A7II with battery gripand my favorite wide angle lens, the Sony 10-18mm.
after a hard day’s work (still hot:)
So you have been thinking about this grip
there are a few hidden benefits if you already have the Meike battery grip for the A7/A7ii series. It uses the same battery tray and you can mount the ProMediaGear bracket to add attachments. Very nice indeed.
To use the remote and or vertical shutter release, you will need to attach the provided USB cable and connect the grip to the camera. Skip that part.
Holding it with the grip attached adds security since it provides more space to wrap your fingers around, this is subjective of course.
The grip still wobbles after tightening the screw with plumbing pliers (don’t do it, you might break the grip) temporary work around, gaffa tape around the inner edges/contact points of the grip, adds significant stability. Searching for self adhesive cork tape, that should do the job, for now gaffa tape works.
You will also loose easy access to the memory card since you have to remove the grip, use usb connection.
With two batteries inserted, the grip is still very light. My favorite part is the ability to attach the MediaProGear bracket. This turns the A6300 into a practical work horse. More to come…stay tuned
If you find this article helpful, please consider helping me maintaining this blog by purchasing your gear through my product links to Adorama and B&H and Ebay. It will cost you nothing and allows me to keep adding! Or consider making a direct donation using PayPal, thank you!